[1] 汤 雅,王国平.影响牙科用钛和钛合金种植体腐蚀性的因素[J].国际口腔医学 杂志,2008,35(3):347-349.
[2] 王林红,樊立洁,谷志远.钛离子诱导骨吸收的现象及机制[J].国际口腔医学杂志,2009,36(4):441-444.
[3] Frisken K W, Dandle G W, Lugowski S, et al. A study of titanium release into body organs following the insertion of single threaded screw implant into the mandibles of sheep[J]. Aust Dent J, 2002,47:214-217.
[4] Meyer U, Buhner M, Buchter A, et al. Fast element mapping of titanium wear around implants of different surface structures[J]. Clini Oral Impant Res, 2006,17: 206-211.
[5] 王成洁,武丽春,康 华,等. ITI种植体在3.0 T MRI检查中的伪影影响[J].中国医疗设备, 2012(11):160-162.
[6] Akawaga Y,Hosokawa R, Sato Y. Comparsion between freestanding and tooth-connected partially stabilized zirconia implant after two years’ function in monkey[J]. J Prosthet Dent, 1998,80(5): 551-558.
[7] Oliva J, Oliva X, Oliva J D. Five-year success rate of 831 consecutively placed Zirconia dental implants in humans: a comparison of three different rough surfaces[J]. J Oral Maxillofac Implants, 2010, 25(2):336-344.
[8] Borgonovo A E, Arnaboldi O, Censi R, et al. Edentulous jaws rehabilitation with yttrium-stabilized zirconium dioxide implants: two years follow-up experience.[J].Minerva Stomatol,2010,59(7-8):381-384.
[9] Zembic A, Bosch A, Jung R E, et al. Five-year results of a randomized controlled clinical trial comparing zirconia and titanium abutments supporting single-implant crowns in canine and posterior regions[J]. Clin Oral Implants Res, 2013,24(4):384-390.
[10] 高 戈, 夏海斌, 李小倩,等.自由成形制备氧化锆全瓷牙种植体的初步研究[J].生物医学工程与临床, 2011,15(6):521-526.
[11] Setzer B, Bchle M, Metzger M C, et al. The gene-experession and phenotypic response of hFOB 1.19 osteoblasts to surface-modified titanium and zirconia[J]. Biomaterials, 2009,30(6):979-980.
[12] Depprich R, Zipprich H, Ommerborn M, et al. Osseointegration of zjrconia implants compared with titanium:an in vivo study[J]. Head Face Med, 2008,4(1):30- 37.
[13] Lee J, Sieweke J H, Rodriguez N A, et al. Evaluation of nano-technology- modified zircinia oral implants: a study in rabbits[J]. J Clin Periodontol, 2009,36(7): 610-617.
[14] Rocchietta I, Fontanan F, Addis A. Surface-modified zirconia implant: tissue response in rabbits[J].Clin Oral Implants Res, 2009,20(8): 844-850.
[15] Kohal R J, Bchle M, Att W, et al. Osteoblast and bone tissue r esponse to surface modified zirconia and titanium implant materials[J]. Dent Mater, 2013,29(7):763-766.
[16] Schliephake H, Hefti F, Schlotting F. Mechallical anchorage and peri-implant bone formation of surface-modified zironia in minipigs[J]. J Clin Periodontol, 2010, 37(9):818-828.
[17] Kohal R J, Weng D, Bachle M. Loaded custom-made zirconia and titanium implants show similar osseointegration: an animal esperiment[J]. J Periodontol, 2004, 75(9):1262-1268.
[18] Gahler M, Gudehus S E. Biomechanical and histomorphometric: comparison between zirconia implants with varying surface texture and a titanium implant in te maxilla of minipigs[J]. Clin Oral Implants Res, 2007,18(5):662-668.
[19] Bormann K H, Gellrich N C, Kniha H, et al. Biomechanical evaluation of a microstructured zirconia implant by removal torque comparison with a standard Ti-SLA impant[J].Clin Oral Implants Res, 2012,23(10):1210-1216.
[20] Kohal R J, Wolkewitz M, Hinze M.Biomechanical and histological behavior of zirconia implant: an expriment in the rat[J]. Clin Oral Implants Res, 2009,20(4): 333-339.
[21] Yilmaz H, Aydin C, Gul B E. Flexural strength &fracture toughness of dental core ceramics[J]. J Prosthet Dent, 2007,98(2):120- 128.
[22] Kohal R J, Wolkewitz M, Mueller C. Alumina-reinforcedzir conia implants: survival rate and fracture strength in a masticatory simulation trial[J]. Clin Oral Implants Res, 2010,21(12):1345-1352.
[23] Kohal R J, Wolkewitz M, Tsakona A. The effects of cyclic loading and preparation on the fracture strength of zirconium-dioxide implants: an in vitro investigation.[J]. Clin Oral Implants Res, 2011,22(8):808-814.
[24] Vandooren E, Calamita M, Calgaro M, et al.Mechanical biological clinical aspects of zirconia implant[J]. Eur J Esthet Dent, 2012,7(4):396-417.
[25] Sanon C, Chevalier J, Douillard T, et al. Low temperature degradation and reliability of one-piece ceramic oral implants with a porous surface[J]. Dent Mater, 2013,29(4):389-397.
[26] Gahler M, Burtscher D, Gudehus T, et al. Failure analysis of fractured dental zirconia implants[J]. Clin Oral Implants Res, 2012,23(3): 287-293.
[27] Oliva J, Oliva X, Oliva J D. Five-year success rate of 831 consecutively placed Zirconia dental implants in humans: a comparison of three different rough surfaces[J]. Int J Oral Maxillofac Implants, 2010, 25 (2): 336-344.
[28] Kohal R J, Knauf M, Larsson B, et al. One-piece zirconia oral implants: one-year results from a prospective cohort study Single tooth replacement[J]. J Clin Periodontol, 2012,39(6):590-597.
[29] Kohal R J, Patzelt S B, Butz F, et al. One-piece zirconia oral implants: one-year results from a prospective case series three-unit fixed dental prosthesis (FDP) reconstruction[J]. J Clin Periodontol, 2013, 40(5): 553-562.
[30] Spies B C, Stampf S, Kohal R J. Evaluation of Zirconia-Based All-Ceramic Single Crowns and Fixed Dental Prosthesis on Zirconia Implants: 5-Year Results of a Prospective Cohort Study[J]. Clin Implant Dent Relat Res,2014, 2:7.