[1] 宋连新, 彭阿钦, 郝建东, 等. 骨折愈合后390枚锁定螺钉取出术的研究分析[J]. 中国矫形外科杂志, 2010, 18(18): 1559-1562.
[2] 付义春, 陈检根. 改槽法在钢板螺钉取出困难中的临床应用[J]. 实用骨科杂志, 2010, 16(4): 312-313.
[3] 万永鲜, 阳运康, 卓乃强, 等. 骨科内固定物取出困难的常见原因及应对策略[J]. 中国骨与关节损伤杂志, 2016, 31(11): 1229-1230.
[4] 殷渠东, 顾三军, 孙振中. 锁定钢板螺钉取出困难的研究进展[J]. 中国修复重建外科杂志, 2015, 29(3): 386-390.
[5] Lee H J, Park Y U, Kim S J, et al. Screw stripping and its prevention in the hexagonal socket of 3.5 mm titanium locking screws[J]. Scientific Reports, 2021, 11(1): 21324.
[6] 张 辉, 许亚军, 陈 政, 等. 3.5 mm螺钉系统取出困难的相关因素分析[J]. 中国骨与关节损伤杂志, 2016, 31(7): 774-775.
[7] 王华溢, 杨重飞, 朱庆生, 等. 锁定螺钉取出困难的原因分析及解决方案[J]. 中国骨与关节损伤杂志, 2013, 28(3): 292-293.
[8] Shiers G F, Matthews H, Rodham P, et al. Systematic review of incidence of cold-welding phenomenon in use of implants for fracture fixation and collation of removal techniques[J]. J Clin Med, 2025, 14: 223.
[9] Campbell R J, Symes M, Sivakumar B, et al. Removal of a ‘cold-welded’ femoral head lag screw in a nail combination[J]. BMJ Case Reports, 2025, 18: 421.
[10] Yanagisawa Y, Eda Y, Yamazaki M. Technical note on the removal of a “cold-welded” lag screw from a trigen meta-tan nail[J]. Trauma Case Reports, 2021, 35: 100526
[11] Peterson D F, Schabel K. Cold welding of the synthes femoral neck system encountered at conversion to arthroplasty: a case report[J]. JBJS Case Connector, 2023, 13: 456.
[12] Maehara T, Moritani S, Ikuma H, et al. Difficulties in removal of the titanium locking plate in Japan[J]. Injury, 2013, 44(8): 1122-1126.
[13] Ehlinger M, Adam P, Simon P, et al. Technical difficulties in hardware removal in titanium compression plates with locking screws[J]. Orthop Tra Surg Res, 2009, 95(5): 373-376.
[14] 吴佳俊, 朱 越. 锁定加压钢板及锁定螺钉取出困难相关因素分析[J]. 中华临床医师杂志(电子版), 2013, 7(24): 11858-11860.
[15] Fujita K, Yasutake H, Horii T, et al. Difficulty in locking head screw removal[J]. J Orthop Sci, 2014, 19(2): 304-307.
[16] 文 文, 佘远举, 熊 健. 内固定物取出困难的对策及预防[J]. 生物骨科材料与临床研究, 2016, 13(2): 78-80.
[17] Autefage A, Follope C, Palierne S. Effect of tightening locking screws torque on unscrewing ability and on the screw removal torque[J]. Res Vet Sci, 2025, 197: 105973.
[18] 王清海, 冯彦清, 王彦平. 骨科内固定物取出困难124例分析[J]. 宁夏医学杂志, 2014, 36(11): 1056-1058.
[19] 陈跃华. 四肢骨折内固定术愈合后内固定装置取出困难的原因及对策[J]. 中国医药指南, 2016, 14(2): 156.
[20] 韦光福. 四肢骨折内固定术愈合后内固定装置取出困难的原因及对策[J]. 大家健康(学术版), 2015, 9(3): 123-124.
[21] 张文博, 贾胜洪, 李国栋, 等. 锁定钢板上螺钉取出困难的解决方法及注意事项[J]. 世界复合医学, 2019, 5(6): 111-114.
[22] 张国烈, 温羡宏, 冯文参, 等. 锁定钢板螺钉取出困难原因及解决方法的探讨[J]. 临床医学工程, 2012, 19(2): 210-211.
[23] Samargandi R, Nail L R. A simple technique to prevent screw stripping during hardware removal using bone wax[J]. Cureus, 2023, 15(5): e39683.
[24] 罗守信, 包秀芝. 齿科打磨机在内固定术后螺钉取出困难中的应用[J]. 内蒙古医学杂志, 2014, 46(3): 383.
[25] 曹荣旗. 齿科金刚砂砂片在螺钉取出困难中的应用[J]. 中国骨与关节损伤杂志, 2007, 22(4): 336-337.
[26] 焦 鲲, 罗树林, 吕品硕, 等. 骨折愈合内固定取出术中用环锯取出滑丝螺钉的方法[J]. 中国骨与关节损伤杂志, 2021, 36(6): 664-665.
[27] 覃文报, 蓝春祎, 韩 春, 等. 四肢锁定钢板螺钉取出困难的原因分析及对策[J]. 实用骨科杂志, 2016, 22(4): 377-379.
[28] 王大勇, 娄丽艳, 刘常胜, 等. 内固定螺钉取出困难的应对方法及研究[J]. 实用骨科杂志, 2010, 16(8): 633-634,640.
[29] 肖 雄,杜 刚,王 林,等. 骨凿撬动方法在螺钉滑牙锁定钢板取出中的应用[J]. 中国矫形外科杂志, 2019, 27(10): 930-933.
[30] 杨 明. 钢板螺钉取出困难的应对方法(附24例报告)[J]. 江西医药, 2012, 47(12): 1074-1075.
[31] Pathrot D, Manual S, Srinath K M, et al. A novel surgical technique for removal of intramedullary nails when there is a failure of the proximal extraction device: report of two cases and review of literature[J]. Injury, 2024, 55: 111533.
[32] 孙 宁, 张 权, 朱仕文. 四肢骨折术后内固定螺钉取出困难的危险因素分析[J]. 北京大学学报(医学版), 2016, 48(2): 373-376.
[33] 赵万东, 王 宁, 汪 斌, 等. 一种打滑螺钉取出保护器的研制与应用[J]. 实用骨科杂志, 2017, 23(8): 757-758.
[34] 刘 超, 仇成华, 徐达强. 两段式拉力螺钉的滑丝率和加压力研究[J]. 中医正骨, 2025, 37(2): 28-33.
[35] 叶优胜. 钢板螺钉取出困难20例分析[J]. 浙江创伤外科, 2008, 13(6): 554.
[36] Masoni V, Ciatti C, Andriollo L, et al. Implant removal: benefits and drawbacks - results of a survey with five hundred participants from the Italian Society of Orthopedic Surgery and Traumatology (SIOT) and comparison with other international trends[J].Int Orthop, 2025, 49(8): 1775-1787.
[37] Sumanth M, Prabhakar, Joshua D, et al. A simple technique for removal of interlocking screw from an intramedullary nail: a case report[J]. J Orthop Case Rep, 2021, 11: 12-15.
[38] 陈思禹, 陈瑞骥, 龚太乾, 等. 镁离子纳米材料在骨折愈合中的应用进展[J]. 武警医学, 2025, 36(3): 267-272.
[39] Kim J, Jung Y, Lee Y S, et al. Micro-CT and histomorphometric analysis of degradability and new bone formation of anodized Mg-Ca system[J]. Biomimetics (Basel), 2025, 10(9):583.
[40] May H, Kati Y A, Gumussuyu G, et al. Bioabsorbable magnesium screw versus conventional titanium screw fixation for medial malleolar fractures[J]. J Orthop Traumatol, 2020, 21(1): 9.
[41] Dehghan N, Frane N, Vohra A, et al. How difficult is titanium plate and screw implant removal? A retrospective case series[J]. Injury, 2024, 55(11): 111824.
[42] Sonoda K, Kubo Y, Hara T. Challenges in the removal of circular cross-section lag screw following compression hip screw fixation: a report of two cases[J]. Cureus, 2025, 17(7): e88764.
[43] Mayers A J, Hayes D, Chaclas N, et al. Partially threaded screws require more work during removal compared to fully threaded screws in a bone simulation model[J]. J Pediatr Soc North Am, 2024, 8: 100099.